Gauge hanger

The CTR 1.850 Gauge Hanger is for use in 4" to 7" casings. It is set by using compression; the internal parts are pulled upwards, and the external parts are pushed downwards. This will anchor the 2 sets of slips to the casing wall.
 
A ratchet lock mechanism will keep the gauge hanger compressed. At a predetermined force, a shear stud will part and free the running tool from the gauge hanger.
 
When retrieving, an SB type pulling tool is used to latch onto the fishing neck. By jarring upwards a core inside a collet will move up, making it possible for the collet to collapse and travel downwards. This will stretch out the whole assembly, and make the 2 sets of slips collapse.
 
The gauge hanger can then be fully retrieved.

Key features & benefits

• Reliable in operation
• Self centralizing
• Larger flow area than conventional gauge hangers
• Setting and retrieving can be done on wireline, e-Line, coiled tubing or drill pipe
• 100% retrievable
• 6000 lbs anchoring capacity
• Can be placed directly in the production flow

Typical applications

• Anchor for memory gauges in open or cased hole
• Anchor for memory PLT`s used for stationary logging in open or cased hole
• Anchor for downhole sampling tools
• Anchor for Inflatable tools
• Anchor for perforation guns
• As a replacement for damaged or scaled nipple profiles